VigorTalk ATA-24
Introducción
|
|
|
|
VigorTalk ATA-24 is a VoIP Gateway and it provides large VoIP ports which is designed for ISP/SI. VigorTalk ATA-24 not only provides high quality call service, but also supports various VoIP protocol and supplementary services.
The SNMP-based of VigorCMS is the management software offers an easy way to remotely set up configurations, update system status, display alarm events, monitor system behaviors, perform diagnostics and download firmware and email attacking alert. For installation, status monitor and management of VigorTalk ATA-24 series of routers, it will be easily accomplished through a built-in web user interface or Telnet command line Interface.
Especificaciones
Technical Specifications of VigorTalk ATA-24 |
||||
| Hardware Interface | MGN | 1 port 10/100/1000 Base-Tx switch | ||
| WAN | 2 Ports | |||
| Mirror Port | 1 Port | |||
| Console | 1 Port | |||
| VoIP | 24 Ports 50-pin RJ-21 Champ Connector | |||
| VoIP | FXS ( 24 Ports ) | |||
| MGCP / SIP / H248 | ||||
| Codec G.711, 729A, 723.1, G.726 | ||||
| VAD ( Silence Suppression ) & CNG | ||||
| G.168-2000 Echo Canceller, Jitter Buffer | ||||
| Packet Loss Concealment | ||||
| RFC2833 - Out of Band DTMF | ||||
| Gain / Attenuation Setting | ||||
| Modem Support Rate Up V.92 | ||||
| Caller ID Support : Bellcore, ETSI, DTMF-based ( Nor-Europe ) | ||||
| Line Polarity Reversal Generation | ||||
| Hunting Group | ||||
| Call Holding & Call Forwarding | ||||
| Call Transfer, Call Waiting , 3-way Conference | ||||
| Outbound Proxy | ||||
| NAT Traversal ( STUN ) ( RFC 3489 ) | ||||
| Incoming Call Barring | ||||
| T.38 Fax Relay | ||||
| Single Codec Assignment | ||||
| Multiple SIP Proxies Registering | ||||
| Network Features | DHCP Client | |||
| DDNS Client | ||||
| Port Mirroring | ||||
| WAN Port Backup | ||||
| Firewall | Denial of service Prevention | |||
| VigorCMS | On-line Device Status | |||
| Firewall Configuration ( DoS ) | ||||
| VoIP Configuration | ||||
| Performance Monitoring | ||||
| Topology | ||||
| Log | ||||
| Alarm | ||||
| Line Test and Diagnostic Functions | Metallic Loop Test | AC Voltage | ||
| AC Current | ||||
| DC Voltage | ||||
| DC Current | ||||
| Resistance | ||||
| Capacitance | ||||
| Line Card Test | Normal Battery | |||
| Loop Current | ||||
| Dial Tone Testing | ||||
| Dial Digit Testing | ||||
| Ring Voltage Testing | ||||
| User Phone Test | Pulse Digit Receiving Test | |||
| Low Frequency Signal Level Test | ||||
| High Frequency Signal Level Test | ||||
| Low Frequency Test | ||||
| High Frequency Test | ||||
| DTMF Tone Dialing Digit Receiving Test | ||||
| Howler Tone Test | ||||
| Ringing Test | ||||
| System Management | Web User Interface | |||
| Command Line Interface ( Telent, Console ) | ||||
| Command Line Interface-SSH | ||||
| Remote Firmware Upgrade | ||||
| Syslog for Logging and Monitoring | ||||
| SNMP | Basic MIBs | |||
| VoIP | ||||
| Firewall ( DoS ) | ||||
| Alarm | ||||
| Max. Power | 100 Watt | |||
| Dimension | L440 * W280 * H45 (mm) | |||
| Power | 100 ~ 240 VAC | |||
Enlaces
Desde esta página puede acceder a enlaces de interés así como a una demostración del interface WEB del router.
Demo del Interface WEB de administración del VigorTalk ATA-24.
Puede navegar libremente por los menues de configuración del router. Puede que al tratarse de una demo, alguna de las funciones no se verán correctamente ó no están accesibles.
Firmware y Documentación del VigorTalk ATA-24
Desde este enlace se accede al directorio de descargas de firmware del VigorTalk ATA-24. También puede navegar por los directorios por si necesita descargarse información o firmware de otros modelos de Draytek. También encontrará un Datasheet con las características de los modelos de esta serie.
Aplicaciones
VigorTalk ATA-24 can extend internal ports to reduce operational fee of the company or business. VigorTalk ATA-24 provides 24 FXS interfaces which can support VoIP service between branch offices by bundled with security router and IP-PBX server.
Branch Office Interconnection Application
Security Application
The DoS function helps to detect and mitigate DoS attacks. These include flooding-type attacks and vulnerability attacks. Flooding-type attacks attemp to use up all your system's resources while vulnerability attacks try to paralyze the system by offending the vulnerabilities of the protocol or operation system.
